Description:

GT044 Air-Block®

The GT044 unit is a small 100mm square 2-part cable grommet. It is simple to open and closes firmly around cables/conduit to form a tight air-seal. 2no. quick action clamping arms firmly hold the grommet within the raised access floor opening. The grommets tapered flange hides the cut edge of the floor covering.  The grommet is supplied with a tethered safety lid for easy access if required. Like other products in the Air-Block range, this unit can be fitted almost anywhere with the floor panel surface even at its edge. Edge locations mean that cables are not trapped within the floor panel and are easily released from the grommet housing without the need to unplug the cable. The unit is supplied with 2no. screw cap covers to conceal the clamping screw heads and provide a monolithic surface finish.

The GT044 is structurally very strong and fits into a 100mm x 100mm floor opening. The unit is held firmly in place by 2 no. quick action clamping arms. This heavy-duty grommet will withstand a point load of 450kg and is supplied with a safety cover which is typically used during fit out and prior to cable installation to prevent unwanted access to the floor void. The 100mm grommet opening is large enough to facilitate the passage of a conduit power module through the floor opening for installation within the desk. The GT044 Will then safely seal that opening and provide a high-performance seal around the conduit 

Standard stock colour - BLACK